Anchor Shackle
Anchor Shackle
The G-209 screw pin anchor shackles meet the requirements of federal specification RR-C-271F Type IVA, Grade A, Class 2, Except for those provisions required of the contractor
The products listed in the product sheet are transferred to the Inquiry List, enabling you to explore items of potential interest. After reviewing, simply access the Inquiry List, conduct a final check, and click “Send Request.” The system will promptly deliver the quotation in PDF format to your specified email. To expedite response times and access advantageous credit terms, we encourage you to create an account without delay!
Customer Service Made Easy!
Easily contact our customer representatives through various channels below.
The G-209 screw pin anchor shackles meet the requirements of federal specification RR-C-271F Type IVA, Grade A, Class 2, Except for those provisions required of the contractor.
What makes Crosby Shackles so special?
Crosby shackles are far superior to any other shackle we sell. Forged at high temperatures (including the markings) these shackles receive no surface damage from hand stamping and do not suffer from weaknesses found in shackles manufactured from steel bars. No expense is spared by Crosby in the design and manufacture of these vital rigging components.
- The capacities 1/3 up to 55 metric tonnes are grade 6
- Forged, Quenched, and tempered with alloy pins
- The working load limit and grade 6 is permanently shown on every shackle
- The shackles are hot dip galvanised or self-colored and are fatigue rated
- Shackles 25 Tonne and over are RFID-equipped (Radio Frequency Identification)
- The Shackles can be provided proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or any other certification. Proof testing and certification are available when requested
- The Shackles are approved to be used in temperatures ranging from -40˚Cup to 204˚C
- 3.25t through to 25T G209 anchor shackles are type-approved certification
- All other 209 and 210 shackles can meet charpy requirements of 42 Joule (31 ft-lbs) Avg. at -20C upon special request
- Meets and exceeds all requirements of ASME B30.26
- Type approval and certification under ABS 2006 Steel Vessel Rules 1-1-17.7 and ABS guide for certification of cranes
- Look for the RED pin… The mark of genuine Crosby quality
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Safe Working Load (SWL) (Metric Tons) | .5, .75, 1.0, 1.5, 2, 3.25, 4.75, 6.5, 8.5, 9.5, 12, 13.5, 17, 25, 35, 55 |